Exotic Hardwood Decking: Cumaru, Garapa and Red Balau Compared

Exotic Hardwood Decking: Cumaru, Garapa and Red Balau Compared

A deck is one of the few building projects you will walk on, sit on and look at every day for years. Exotic hardwoods have a loyal following for good reason: they are dense, durable and handsome. But "exotic hardwood decking" covers a lot of ground, so it helps to know how the main options differ before you commit.

The short version

  • Cumaru, garapa and red balau are all dense hardwoods that are popular for outdoor decking.
  • Cumaru is the hardest and darkest of the three, garapa is lighter and golden, and red balau sits in between with a warm red-brown tone.
  • All of them need pre-drilled holes and corrosion-resistant fasteners.
  • Your choice comes down to colour, how much work you are happy to put in, and how the deck will be used.

Why choose exotic hardwood for a deck?

Strong and long-lasting

Dense hardwoods stand up to foot traffic, furniture and weather better than many softer woods. With the right care, a hardwood deck can last for many years.

Natural resistance

Many of these species naturally resist rot and insects, which is a big part of why they are used outdoors.

Real character

The grain and colour of a hardwood deck have a richness that is hard to get from other materials. No two boards are the same.

Flexible finishing

You can keep the original colour with a UV-protective oil, or let the wood weather to a soft silver-grey. Both are valid choices, and it is a matter of taste.

Cumaru, garapa and red balau at a glance

Cumaru: A very dense, hard wood with a rich brown to reddish tone, sometimes with golden streaks. It is a strong choice if you want maximum durability, though its density makes it more demanding to cut and fasten.

Garapa: Lighter in colour, with a golden to yellowish tone. It is generally easier to work than the very hardest species, and its bright look suits modern and coastal spaces.

Red balau: A warm reddish-brown hardwood that is known for being tough and stable. It is a good middle path if you like a deeper colour without going to the darkest end.

You can also see the wider range on our premium exotic decking hardwoods page, and get ideas from the gallery.

Colour will vary from board to board, and it changes with time and sunlight. Treat any photo as a guide, not a guarantee.

How to choose: a plain-English walkthrough

  1. Start with the look you want. Dark and rich, golden and bright, or somewhere in between. Colour is usually the first thing people decide.
  2. Think about how you will use the space. A busy family deck, a pool surround and a quiet balcony all put different demands on the wood.
  3. Be honest about maintenance. Oiling keeps the colour, but it is a regular job. If you prefer low effort, letting the deck weather naturally is an option.
  4. Check your tools and your installer. Very dense wood is hard on blades and drill bits. Make sure whoever is building the deck has experience with hardwoods.
  5. Plan quantities with a margin. Allow extra boards for cuts, waste and boards you decide not to use.

Installing hardwood decking: the basics

Hardwood decking is not difficult to install, but it needs a different approach from softwood. The general points below apply, and you should always follow the manufacturer's guidance.

  • Pre-drill every screw hole. Dense wood will split or snap screws if you drive them straight in.
  • Use stainless steel fasteners. Cheap screws can corrode and stain the wood.
  • Leave gaps between boards. Wood moves with changes in moisture and temperature, and gaps also help drainage.
  • Seal the cut ends. Fresh end grain loses and takes on moisture faster than the face of the board, so sealing helps prevent cracks.
  • Allow airflow underneath. A well-ventilated frame helps the deck stay dry and last longer.

Mistakes that are easy to avoid

Choosing on colour alone. A beautiful board that is hard to install can lead to a frustrating build. Consider the whole job.

Skipping the pre-drilling. It is the most common cause of split boards and broken screws on hardwood decks.

Forgetting about the sun. Unprotected wood will fade and turn grey. If you want to keep the colour, plan to oil regularly.

Underestimating the quantity. Running short mid-project can mean a colour mismatch with a later batch. Order a little extra.

Common questions

Which is the hardest of the three?

Cumaru is generally the hardest and densest of the three, which is why it needs the most care during installation.

Do I have to oil my deck?

No. Oiling keeps the original colour, but many people let the wood weather to a silver-grey. Both are fine, and it comes down to the look you prefer.

Can I order the exact quantity I need for my deck?

Contact us with the size of your deck and we will help you work out quantities and availability.

How is shipping handled?

Decking is heavy, so shipping depends on quantity and destination. Please contact us before you order so we can confirm the details.

Ready to plan your deck?

Tell us the size of your space and the look you are after, and we will help you choose the right decking.

Explore exotic decking | Contact us

Important: Before placing your order, kindly contact us. Shipping is not included in the price. Shipping is calculated after you place your order.