Every luthier hears the same question sooner or later: what wood should I use? The honest answer is that it depends on what you want the guitar to do. A bright, punchy strummer and a warm, quiet fingerstyle guitar ask for different wood, and each part of the guitar plays a different role.
The short version
- The top has the biggest influence on how an acoustic guitar sounds, so spend the most thought on it.
- Back and sides shape the tone and add character, as well as the look.
- Necks and fingerboards need stability and strength first.
- Think about the sound you want, then pick a wood that suits it, and always check the grain and the quality of the cut.
What does each part of the guitar do?
The top (soundboard)
The top is the part that moves most when you play. It acts like a speaker, so its stiffness, weight and grain have a big effect on volume, response and tone.
Back and sides
The back and sides support the top and reflect and shape the sound. Many players also choose them for how they look, since they are the most visible part of the instrument.
Neck
The neck has to resist bending under string tension. Straight grain and stability matter more here than appearance.
Fingerboard and bridge
These parts take wear and need to be hard and dense. They also affect how the guitar feels under your hands.
How different tonewoods are usually described
Tone is partly personal, and no two pieces of wood sound exactly the same. Still, there are general tendencies that help you narrow things down.
Spruce tops: The most common top wood. It is known for a clear, balanced sound with good dynamic range, and it works for many playing styles.
Cedar tops: Often described as warmer and quicker to respond. Many fingerstyle players like it because it sounds good even with a light touch.
Mahogany back and sides: Known for a warm, focused sound with a strong midrange. It is a classic choice for blues and folk guitars.
Rosewood back and sides: Usually associated with a rich, full sound with deep lows and shimmering highs. It is a long-standing favourite for premium acoustics.
Maple: Bright, clear and articulate. It is also used for necks, and for archtop and electric guitar bodies and tops.
Walnut, koa and other alternatives: These sit between the classics in tone, and they are popular for their appearance. Koa in particular is loved for its colour and figure.
Browse our full range of tonewoods, or go straight to guitar tops and acoustic guitar sets. For help comparing species, try the Wood Species Library.
Picking your wood: a plain-English walkthrough
Here is a simple way to work through the decision.
- Decide what you are building. Acoustic, electric, archtop, bass or ukulele. Our collections are organised by instrument, which makes browsing easier.
- Describe the sound you want. Warm and mellow, bright and clear, or something in between. Write it down. It will guide every other choice.
- Choose the top first. Because the top matters most for an acoustic, pick it before the back and sides, then choose a back and sides that complement it.
- Check grain and cut. Look for straight, even grain lines, and wood that is cut to give good stability. A beautiful piece with poor grain structure can cause trouble later.
- Match the look. Once the tone is sorted, choose colour and figure to suit your taste. A matched set looks cohesive and professional.
Mistakes that are easy to avoid
Choosing only by looks. Dramatic figure is lovely, but it does not guarantee good tone or stability. Always consider the structure of the wood as well.
Ignoring moisture and acclimation. Let your wood settle in your workshop before you build. Wood that moves after the guitar is finished can cause cracks and glue failures.
Forgetting about regulations. Some species, including many rosewoods, are subject to trade rules. If you are shipping internationally, check the requirements before you order.
Buying with no spare. If you are new to building, a mistake can ruin a set. Think about whether you need a spare.
Common questions
Do I need to buy a matched set?
For back and sides, a matched set gives you symmetrical grain and colour. For other parts, individual pieces are often fine.
Can I get a specific size or cut?
Often, yes. Get in touch and tell us the instrument and the part, and we will see what we can find or arrange.
Do you carry wood for electric guitars and basses?
Yes. We have body blanks, drop tops, carved tops and neck blanks for electric guitars and basses. Browse by instrument or by part to find what you need.
How is shipping handled?
Shipping is not included in the listed price. It is worked out after you place your order, because cost depends on size, weight and destination.
Ready to start your build?
Browse our tonewoods, or tell us what you are building and we will help you pick the right wood.